SERIES AL-1000 for multi pole stators of small precision motors.@@
MODEL AL-1022 CNC controlled coil winder. (Includes a 2 head and 1 turn table)
The AL-1022 coil winder shows a high performance for outer-rotor type small precision motors of HDD, FDD, CD-ROM etc.
<FEATURES>
(1) High operation efficiency by automatic cutting and holding of copper wire, where the operator is only required to load/unload the core.
(2) High reliability and production output by adapting all-spindle NC controlled AC servomotor.
(3) As for multipole stator coils, the angles and positions of intermediate pulling wires are freely selected by programming with NC controlled indexing.
(4) A simple programming method by 4-code command input according to winding patterns.
SPECIFICATIONS |
|||
Number of spindles |
2 (each runs simultaneously) |
Thickness of core layer |
15mmMAX |
Rotational speed of flyer |
3,000rpm |
Wire sizes |
0.3mm Max |
Indexing |
free choice by NC control |
Control unit |
Type AWC-201 |
Traverse travel |
100mm Max |
Dimensions |
W460 x D900 x H1,350 |
Outer diameter of core |
40mmMAX |
Weight |
approx. 220kg |
The above specifications are subject to chages in our improvements without prior notice.
Contact Us: altec-info@altec.co.jp
ALTEC KYOTO CORPORATION.
31-1 Kaminaranagaike, Yawata-shi, Kyoto 614, JAPAN
TEL: 81-75-983-1662, FAX:81-75-971-1692